| General |
| Accepts user-supplied Decora® cover plate to match other electrical devices. |
| Onboard amplifier powers one pair of 6 – 8-ohm speakers (sensitivity greater than 88dB) without additional equipment. Toggle switch controls volume. |
| Uses industry-standard powered A-BUS® connection without need for external power supply. |
| Integrated IR sensor relays commands from Harman Kardon Zone II remotes to A/V receiver via the A-BUS connection without additional devices or wires. |
| System Requirements : |
|
Use with AVR 630, AVR 430 or other A-BUS/Ready® audio components via Cat. 5 cable. |
| Wire Type Required : |
|
Category 5/5e (or better) cable in compliance with any applicable local building code or NEC requirements for in-wall, riser or plenum use. |
| Wiring Protocols : |
|
TIA wiring specification for T568A at the A-BUS/Ready product end. Connections at the AB 1 are specified on the AB 1. |
| Connection Terminals : |
|
IDT type for Category 5/5e wire; screw terminal type for speaker connections. |
| Speaker Wire : |
|
Maximum AWG 14, in compliance with any applicable local building code or NEC requirements for in-wall, riser or plenum use. |
| Speaker Impedance : |
|
Suitable for connection to speakers with nominal 6 ohms to 8 ohms impedance. |
| Speaker Sensitivity : |
|
Optimized for speakers with sensitivity above 88dB. |
| Infrared Compatibility : |
|
38kHz and 56kHz, with talkback. |
Dimensions
(H x W x D) : |
|
108mm x 44mm x 57mm
(4-1/4" x 1-3/4" x 2-1/4") |
| Weight : |
|
0.11kg (0.25 lb) |